edit task modify the front gable wall short elevation of this single storey modular home replace the current window and the wood clad triangle above it with one continuous floor to ridge glazed facade that fills the entire gable end from floor level all the way up to the roof ridge apex following the exact triangular shape of the gable central mullion one vertical structural mullion post exactly in the center of the facade running continuously from the floor threshold level straight up to the ridge apex point it must reach all the way to the peak of the roof not stop at eave height mullion in dark anthracite aluminum ral 7016 matte finish matching the existing window door frames on the building this mullion splits the glazed gable into two symmetrical triangular trapezoidal glass sections left and right glazing both sides of the mullion are fully glazed floor to roofline following the roof pitch angle upper triangular portion previously wood clad gable is now fully glazed no wood boards no horizontal cladding strips in this zone glass slightly reflective tinted consistent with the other windows in the image entrance door one single leaf entry door integrated into the right hand glazed section directly beside the central mullion mullion acts as the door s left side frame door is full height glazed same anthracite aluminum frame profile as the rest of the facade slim vertical handle door reads as part of the glass wall system flush with the
