prompt modify the building s facade material only in two specific areas marked by colored outlines on the attached image every other wall must stay exactly as it is now do not extend spread or copy the material change to any wall that is not outlined red outlined area the walls inside the red outline are currently white plain change them to gray clinker brick cladding visible brick texture with individual bricks and mortar joints gray grey brick tone masonry brick finish not smooth or painted blue outlined area the walls inside the blue outline are currently clinker brick textured change them to smooth white walls flat plain painted plastered finish no brick texture critical do not touch any wall outside the red and blue outlines any wall that is not inside the red or blue outline including white walls elsewhere on the building such as walls on the right side side walls or any other facade section must remain in its original material and color do not apply gray clinker brick to any wall outside the red outline even if it is white do not apply white to any wall outside the blue outline even if it is clinker the material change must be strictly contained within the two outlined zones and must not bleed spread or extend beyond them onto adjacent or unrelated walls remove the outline markings the red and blue lines are only reference markers not part of the building after applying the material changes completely remove both outline lines from the final image no colored lines markings or annotations should remain visible keep unchanged all walls outside the two outlined areas roof windows doors surrounding environment and lighting must remain exactly as in the original image same geometry proportions shadows and composition
