led position through the wooden shelves absolute priority the two vertical led strips must pass through every horizontal wooden shelf exactly at the middle of the shelf depth this positioning is extremely important at every horizontal shelf the vertical led penetration cut through slot must be located exactly halfway between the front edge and the back edge of the wooden shelf the led must therefore cross the shelf at its center depth the led must not pass through the front portion of the shelf the led must not pass through the rear portion of the shelf the led must not sit directly on the front edge the led must not sit directly against the back panel the position must be front edge equal distance vertical led equal distance back edge in other words each vertical led must intersect every horizontal shelf at approximately 50 of the shelf depth very important middle of the shelf means the middle of its depth from front to back it does not mean the center of the shelf width from left to right the left vertical led remains integrated near the inner left side of the shelving tower the right vertical led remains integrated near the inner right side of the shelving tower however both leds must be positioned at the mid depth line of the shelves the vertical led channels must therefore form two perfectly straight continuous lines one along the left interior side at 50 shelf depth one along the right interior side at 50 shelf depth these exact positions must remain constant from the very top of the shelving tower to the very bottom led strike through position where each vertical led crosses a horizontal wooden shelf create a very narrow precise cut through slot exactly at the middle of the shelf depth the slot must be centered between the shelf s front and rear edges the led profile must pass directly through this mid depth slot maintain perfectly straight vertical alignment through every upper shelf every middle shelf every lower shelf every wooden horizontal board the vertical led must never shift forward or backward from one shelf level to another the same 50 depth position must be maintained through the entire shelving tower the led must look like one perfectly straight architectural line penetrating through all horizontal shelves at their exact mid depth very important visual instruction from the side perspective view the led must clearly appear located in the middle of the shelf depth it must visually sit between the front shelf edge the rear shelf wall plane there must be approximately equal shelf depth visible in front of the led and behind the led do not push the led toward the viewer do not push the led toward the back wall do not hide it at the rear do not attach it to the front edge the vertical led position must feel centered within the depth of the shelving construction final led requirement extreme priority the left open shelving tower must contain exactly two continuous vertical led strips one on the inner left side one on the inner right side both must begin at the very top of the shelving tower continue all the way to the very bottom physically pass through every horizontal wooden shelf remain completely uninterrupted remain perfectly vertical remain perfectly aligned be recessed into the joinery use frosted opal diffusers emit warm white 2700k 3000k light most importantly every time the vertical led passes through a horizontal wooden shelf it must pass through exactly at the middle of that shelf s depth the cut through slot must be at 50 of the distance from the front edge to the back edge front of shelf 50 depth vertical led 50 depth back of shelf the led must not be at the front the led must not be at the back the led must be at the center depth of every shelf this position must be identical from top to bottom absolutely no horizontal led strips no led under the shelves no led on the front shelf edges no led on the back shelf edges only two perfectly straight continuous mid depth vertical led lines passing through all horizontal wooden shelves
