edit the provided bathroom visualization only according to the following instructions do not change anything else in the image 1 led lighting in the recess add a continuous integrated led light strip inside the wall recess following exactly the location and extent marked in my sketch the led strip must run vertically for the entire height of the wall recess from floor level up to the ceiling place it inside the recess exactly where indicated by the sketch the lighting should look like a realistic built in architectural led detail with a soft and subtle warm white glow the led should illuminate the recess naturally without creating an excessive glow or changing the overall lighting of the bathroom follow the sketch precisely regarding the position and height of the led 2 bathtub shower faucet change the position of the bathtub shower faucet outlet so that it is installed low on the wall at bathtub level functioning visually like a wall mounted bathtub spout filler the faucet outlet must be much lower than a standard shower mixer it should read clearly as a bathtub water outlet filler not as a shower mixer keep it in the same horizontal location as in the existing design only change its vertical position the shower head remains in exactly the same location as currently shown the shower head and all other shower elements must remain unchanged do not add or remove any additional fixtures 3 preserve the existing design absolutely preserve the original visualization in every other aspect keep the exact camera position and viewing angle keep the exact framing and composition keep all proportions and dimensions keep the geometry of the bathroom unchanged keep the walls ceiling floor bathtub vanity sink mirror tiles furniture and accessories unchanged keep all existing materials colors textures and finishes unchanged keep the existing lighting conditions and overall atmosphere unchanged except for the newly added led do not redesign remodel restyle or reinterpret the bathroom do not move resize replace or modify any existing element unless explicitly instructed above the final image must look identical to the original visualization with only these two modifications 1 the vertical led strip inside the recess exactly according to the sketch and 2 the bathtub faucet outlet lowered to bathtub level
