preserve the exact geometry camera position composition materials and all objects in the scene do not move resize replace or redesign any furniture architecture or light fixtures focus only on refining the illumination behavior of the three suspended vibia array pendant lights above the lounge there are three fixtures two cylindrical array pendants one tapered cone shaped array pendant keep their exact size shape and position unchanged critical reduce perceived brightness and opacity these fixtures must not read as bright light sources or glowing volumes significantly lower their luminance so they appear as soft low intensity decorative lighting avoid any overexposed cores or bright central regions match real vibia array lighting behavior very soft warm diffused glow 2700k 3000k light is filtered through fine vertical filaments not emitted from a visible bulb internal light source must not be visible at any point filament behavior important individual vertical filaments should remain visually distinct light should bleed gently between filaments not fill the volume overall fixture should feel airy and semi transparent not dense or opaque gradient and distribution introduce a subtle vertical gradient bottom portion slightly brighter top portion softer and fading no uniform brightness across the fixture light interaction with the space reduce overall light output onto the environment only a very soft localized ambient glow around each fixture minimal diffused spill on nearby surfaces brick ceiling seating global balance do not increase scene exposure pendants should remain secondary to the room lighting not dominant goal photorealistic vibia array lighting soft dim filament defined breathable and atmospheric they should feel elegant and delicate not like bright lamps or solid luminous objects each of the three fixtures must retain its exact original silhouette and profile the two cylindrical pendants must remain perfectly cylindrical no tapering no conical deformation no change in diameter from top to bottom the cone shaped pendant must remain the only tapered fixture do not introduce additional cones or modify any cylinder into a cone do not alter proportions vertical profiles or cross sectional shapes in any way lighting adjustments must occur strictly within the existing geometry not by modifying form
