use the attached render as the exact reference the current architecture geometry materials camera and lighting are final and approved keep everything exactly as it is only modify the flooring joint setting out only change flooring joint alignment keep the existing flooring exactly as shown same material same colour same texture same slab dimensions same joint width same finish only adjust the position of the flooring joints at the two side ground floor columns the paving joints at these two side columns are currently not aligned with the vertices of the rotated square columns correct this each ground floor column has a square footprint rotated 45 degrees the flooring joint must meet exactly the pointed visible vertex corner of the column use the column vertex as the fixed control point column vertex vertex floor joint floor joint at the left side column move the corresponding flooring joint so that it terminates exactly at the column vertex at the right side column move the corresponding flooring joint so that it terminates exactly at the column vertex the joints must not meet the middle of the column face they must not terminate beside the vertex they must meet precisely at the vertex do not change the columns to match the flooring only adjust the flooring joint position absolute geometry lock the current building geometry is final do not modify any building geometry keep exactly all ground floor columns column dimensions and rotation ground floor horizontal beam all upper horizontal beams all curved beam profiles all upper vertical elements windows balconies and balustrades glazing floor heights fa ade depths all existing joints in the fa ade absolute material lock keep all current materials exactly as shown do not change salmon concrete colour salmon concrete texture brown ground floor concrete colour sandblasted column texture rough ground floor beam texture matte red aluminium glazing flooring material do not change camera crop perspective lighting shadows atmosphere one modification only flooring joints at the two side columns align exactly with the column vertices everything else must remain exactly as the attached render
