eplace the current large format stone cladding on three specific upper level wall planes with lueders limestone veneer in a modern linear ashlar pattern target zones only these three planes 1 left the cream stone cantilevered bay volume on the upper level above the two car garage door facing the camera the box that projects forward with the tall vertical windows on its front face 2 center the cream stone wall plane on the upper level directly above the covered front entry porch between the two cantilevered side volumes extending up to the eave line 3 right the cream stone wall plane on the upper level immediately to the left of the standing seam metal roof wing on the far right behind the upstairs balcony above the slatted balcony rail material spec apply identically to all three planes lueders limestone veneer honed or sawn face smooth not rough chopped modern linear ashlar coursing long horizontal courses broken bond stone heights 4 6 and 8 face heights mixed randomly course to course stone lengths random 6 to 24 modular linear feel color blend cream buff and platinum gray undertones intermixed soft quiet low contrast think anasazi platinum lueders honed or cobra stone cream lueders mortar tight buff cream colored joints raked flush or slightly recessed minimal joint width preserve everything else do not modify standing seam metal roof dark on the right wing unchanged flat low slope roof lines and eaves elsewhere unchanged all windows size mullion pattern glass tint reflections unchanged garage door dark steel glass unchanged front entry porch ceiling posts and door unchanged slatted wood balcony rail and vertical wood privacy slats unchanged stucco plaster on any wall not in the three target zones unchanged landscape grass trees plantings walkway driveway unchanged sky clouds and golden hour lighting direction warmth unchanged camera angle framing and perspective unchanged goal a surgical swap of the large format stone on those three planes to a honed lueders modern linear ashlar in cream buff platinum architecture lighting and every other surface must remain identical to the source image
