use the attached render as the base image keep everything exactly as it is do not change camera position camera angle perspective architectural geometry room dimensions walls windows wall finishes ceiling composition chandeliers lighting furniture people decorative elements colours materials spacing or position of the existing ceiling bays only modify the existing athel wood logs and their connections athel wood logs the current horizontal timber lines appear too perfectly straight and continuous this is incorrect each horizontal line across the ceiling must clearly appear to be constructed from different individual natural athel logs connected together along the same bay the viewer must be able to notice that different pieces of timber are being used within the same horizontal line each horizontal line shall therefore consist of three separate natural athel logs connected end to end the three pieces must not look like one continuous manufactured beam each individual log shall have its own slightly different natural geometry slightly different longitudinal curvature slightly different straightness subtle variation in diameter subtle variation in axis subtle changes in alignment where one log meets the next the natural variation must be clearly visible from this camera position connection between the different logs use exactly two rope connections along each horizontal timber line these two ropes represent the two junctions between the three different logs log 1 rope connection log 2 rope connection log 3 the two rope connections shall be approximately equally distributed along the complete span place one connection approximately on the left side of the main chandelier and the second connection approximately on the right side of the main chandelier this should make both connections clearly visible from the current camera position at each rope connection the adjoining logs should have a small but noticeable difference in their natural alignment for example one log can approach the connection with a slight bow and the following log can continue with a slightly different bow or axis they must connect together but they must not form a perfectly straight continuous line the change should be subtle and believable not exaggerated ropes exactly two rope connections per horizontal timber line no more than two do not add additional rope bindings elsewhere along the logs keep the ropes traditional natural and consistent with najdi vernacular construction the rope shall wrap around the junction between the two timber pieces do not make the ropes oversized critical visual objective from this camera position it must be immediately possible to understand that one horizontal bay three different natural logs two rope connections do not simply curve one continuous timber do not make all three pieces follow exactly the same axis do not make the junction disappear the slight change in curvature diameter and alignment between consecutive logs is essential to make the three individual pieces visually distinguishable however keep the irregularity realistic the logs should remain generally horizontal and structurally believable do not add additional wooden beams additional logs above or below secondary supports extra ropes additional ceiling elements everything else in the image must remain 100 unchanged the only objective of this edit is to make each existing horizontal athel timber line visibly composed of three different natural logs connected by exactly two rope junctions
