using this exact image make one precise correction fix the roof overhang so it is consistent on all sides of the building the problem most edges of the roof already show a correct 30cm 0 3 meter overhang beyond the wall line with visible soffit and fascia however the right gable end the far end of the building in the background of this view currently has no overhang the roof there appears to end flush and cut off right at the wall line with no projection no visible underside and no shadow line beneath it the fix important read carefully fix this by extending the roof outward on that right gable end so the roof plane projects 30cm 0 3 meters beyond the wall line do not fix this by shortening cropping or moving the wall inward the wall itself must stay exactly where it currently is it is already too short undersized and must not be reduced further only the roof structure grows outward past the existing wall edge to create the missing overhang the wall s height position and the 7 meter gable depth remain completely unchanged only the roof extends past it match the overhang depth soffit detail fascia board and shadow line already correctly shown on the other roof edges front eave and left gable end all roof edges must have identical consistent 30cm overhangs uniform all the way around the building including this right side gable end achieved by extending the roof never by trimming the wall do not change the wall s size height or position especially do not shorten the gable wall further roof material dark trapezoidal metal color or pitch wall cladding materials and colors light weissbach eiche vinylit wood dark kitami oak entrance bay kept flush with the wall plane not projecting forward window and door design brick base landscaping sky lighting camera angle overall building proportions and dimensions this is a single precise correction extend the roof outward to add the missing 30cm overhang on the right gable end without touching or shrinking the wall beneath it
