paint all walls and the ceiling in ral 6009 fir green the ceiling is smooth not slatted higher at the front and slopes gently toward the back the mirror must be surrounded on all four sides by continuous warm white led light emission forming a soft diffused halo the aluminium led profile is fully recessed and hidden so only the glow is visible not the profile the slatted feature wall is the only slatted element in the room and consists of thin narrow vertical timber slats only the top of the slatted wall runs perfectly level creating a visible painted gap above it in ral 6009 measuring approximately 30 mm at the rear and increasing to a maximum of 100 mm at the front due to the ceiling slope with no timber in this gap a second painted gap of 100 mm is maintained below the slatted wall above the floor soft warm white led light emission is installed directly above and directly below the slatted wall to gently wash the slats with all led profiles hidden in built in recesses and no lighting mounted on the floor no slatted or timber ceiling no visible aluminium profiles and no additional slatted surfaces are to be generated
